田扬超

中国科学技术大学研究员

田扬超，男，1963年1月出生，博士，中国科学技术大学研究员、博士生导师，中国物理学会同步辐射专业委员会常务委员。

人物经历

1992 年10月在中国科学技术大学获得博士学位。

1992年7月-1995年6月，中国科学技术大学国家同步辐射实验室助理研究员，

1995年6月- 2000年1月，国家同步辐射实验室副研究员，

2000 年1月-现在，国家同步辐射实验室研究员。

科研项目

近年来，完成了LIGA和X射线成像光束线实验站等大型实验装置的建设，承担着国家自然基金重点和面上项目、“863”项目和教育部“985”工程二期子项目等研究课题。已在J. MEMS,J. Micromech. Microeng, Micosystem Technologies等国内外杂志共发表70余篇，获得国家专利4项（其中3项为发明专利），申请发明专利两项。

研究方向

1、高空间分辨X射线成像及应用

2、能源材料结构和性能

3、微细加工及微反应系统

论文专著

(1) Lattice-Boltzmann modeling of gas transport in Ni-Yttria-stabilized zirconia anodes during thermal cycling based on X-ray computed tomography - Electrochimica Acta - 2014年1 - 121,386-393（2014）

(2) Quantitative analysis of micro structural and conductivity evolution of Ni-YSZ anodes during thermal cycling based on nano-computed tomography - J.Power Source - - 196,10601-10605(2011)

(3) Analysis of the three-dimensional microstructure of a solid-oxide fuel cell anode using nano X-ray tomography - J Power Source - 2011 - 196:1915-1919

(4) Auxiliary drying to prevent pattern collapse in high aspect ratio nanostructures - Nanotechnology - - 2011

(5) The study of there constructed three-dimensional structure of a solid-oxide fuel-cell cathode by X-ray nanotomography. - J of Synchrotron Radiatio - 2010 - 17,p782

(6) 3D visualization of subcellular structures of Schizosaccharomyces pombe by hard X-ray tomography - J. of Microscopy - 2010 - 240, p14

(7) Schizosaccharomyces pombe, by full-field transmission X-ray microscopy at 5.4 keV - Anal Bioanal Chem - 2010 - 397,p2117

(8) Quantitative study of interior nanostructure in hollow zinc oxide particles on the basis of nondestructive x-ray nanotomography - Appl. Phys. Leet - 2009 - 95, p053180

(9) Three-dimensional imaging of a complex concaved cuboctahedron copper sulfide crytal by x-ray nanotomography - Appl. Phys. Lett. - 2008 - 92, p233104

(10) High resolution hard x-ray microscope on a second generation synchrotron source. Review Scientific Instruments - Review Scientific Instruments - 2008 - 79,p103708

(11) A method of gap control based on the principle of equal thickness interference for HARNS fabrication - Microsyst. Technol. - 2011 - 17:101–107

(12) Study of the demoldingprocess—implications for thermal stress, adhesion and friction control - J. Micromech. Microeng. - 2007年 - 17, pp9-19

(13) The comparison of hair from gastric cancer patients and from healthy persons studied by infrared microspectroscopy and imaging using synchrotronr radiation - Caner Epidemiology - 2010 - 34, p435

(14) Study of Hot Embossing Using Nickel and Ni-PTFE LIGA Mold Inserts - J. MEMS. - 2007年 - 16,pp411-415

(15) Analysis of the demolding forces during hot embossing, Microsystem - Microsystem Technologies - 2007年 - 2007年第13期

(16) An Innovative Microelectrode Fabrication Using Photoliography for Measuring Dissolved Oxygen Distributions in Aerobic Granules. - Environ. Scie Technol. - 2007年 - 2007年第41期

(17) Investigation on overplating high-aspect-ration microstructure - SPIE - 2006 - 2006

(18) Fabrication of 3D Photonic Crystal by deep x-ray lithography - SPIE - 2006 - 2006

(19) Fabrication of X-ray imaging zone plates by e-beam and X-ray lithography - Microsyst. Technol. - 2010 - 16,p1315

(20) Simultaneous Determination of Nitrate and Dissolved Oxygen under Neutral Conditions Using a Novel Silver-Deposited Gold Microelectrode - Eviron. Sci. Technol. - 2008 - 42,pp8465-8470

(21) The properties of demoulding of Ni and Ni-PTFE moulding inserts - Sensors and Actuators A - 200502 - 2005年第2期

(22) The compere of Lifetime of Ni and Ni-PTFE moulding inserts with high aspect-ratio structure - Microsystem Technologies - 2005 - 2005年第4/5期

(23) Simulation of deep Uv-lithegrugphy iwth su-8 resist by using 365 light source - Microsystem Technologies - 2005 - 2005年第4/5期

全国各地天气预报查询

上海市

云南省

云南省

云南省